5.1 Seed cum fertilizer drill 5.2 Raised bed planter
5.3 Inclined Plate Planter 5.4 Pneumatic Multi-crop Planter
5.5 Mat Type Rice Transplanter 5.6 Vegetable Transplanter




The seed cum fertilizer drill consists of a seed box, fertilizer box, seed and fertilizer metering mechanisms, seed/fertiliser tubes, furrow openers, seed and fertilizer rate adjusting lever, chain, sprockets, and transport cum power transmitting wheel. The fluted rollers are driven by a shaft which gets power from wheels. Fluted rollers fixed in the seed box, receive the seeds into longitudinal grooves and drop them in the seed tube attached to the furrow openers. By shifting the rollers sideways, the length of the grooves exposed to the seed, can be increased or decreased and hence the amount of seed to be dropped can be varied.  Fertiliser rate can be varied by increasing or decreasing the opening provided at the bottom of the fertiliser box with the help of a lever.     


Length (mm)

Width (mm)

Height (mm)

Seed metering mechanism

Fertilizer metering mechanism

Number of furrow opener

Seed box capacity (cm3)

Fertilizer box capacity (cm3)

Weight (kg)

Power source (hp/kW)                                


:        1940-2310

:        970-1560

:        1070-1350

:        Fluted roller

:        Gravity feed with agitator

:        9-13, reversible shovel

:        66241-10308

:        63310-10141                                                                                                                                                    TOP

:        224-328

:        5/26.25, tractor


Seed cum fertilizer drills are used for sowing of wheat and other cereal crops in already prepared field

Cost of Machine : Rs.35,000/








It consists of a seedbox, fertiliser box, seed and fertiliser metering mechanism, 3-ridgers, chain, sprockets, transmission wheels, seed/fertiliser cut-off levers and rollers for compacting the beds. The planters form the flat ridges on which seeds are sown. As seeds are sown on the ridges hence root growth is better and increased yield is obtained. The furrows formed are used for irrigation purpose.  It is suitable for sowing wheat, maize, peas etc. Vegetable seed can also sown by this planter.


Suitability                                            :       Wheat, maize, peas, pulses etc.

Weight  (kg)                                      :        230

Overall dimensions  (mm)                   :        1200x2200x1200(LxWxH)

Working width  (mm)                         :        1800

Capacity (ha/h)                                :        0.26         

 Power Source(hp/kW)                     :        45/33.85, tractor                                                                                                                                                                                    TOP


Sowing wheat on beds for economical use of irrigation water and fertilizer in light and medium soils.

Cost   (Rs)    :      45,000   










Tractor mounted 6-row inclined plate planter is a multi-crop planter for planting of both, bold and small seeds which cannot be sown satisfactorily by convention seed drills. The Planter consists of a frame with tool bar, modular seed boxes; furrow openers and ground drive wheel system. It has six modular design seed boxes with independent inclined plate type seed metering mechanism. Seed plates for sowing different seeds can be selected and easily changed.


Purpose                                                    :       Sowing/Planting

Suitability                                                  :       Groundnut, Grams, Soybean and Mustard

Overall dimensions  (mm)                          :       2500x1215x1010(LxWxH)

No. of rows                                              :       6

Field capacity (ha/h)                                 :       0.45-0.65

Cost of operation (Rs./ha)                         :       700

Power Source(hp/kW)                             :       35/26.25,  tractor                                                                                                                                                                                                    TOP


The planter is suitable for sowing of bold seeds like groundnut, maize, Kabuli gram, etc. and very small seeds (mustard, sorghum, etc) size seeds which otherwise cannot be satisfactorily sown by conventional seed drills. The planter is also suitable for sowing of intercrops.

Cost: (Rs)   : 50,000.



Tractor mounted pneumatic planter consists of a centrifugal blower operated by the PTO of a tractor which is used to provide the necessary air pressure to pick up and release the seeds in the metering mechanism. It is a six-row (2 or 4 optional) machine, operated by a tractor of 35 hp/26.25 kW or more to plant single seed at predetermined seed/row spacing. It consists of main frame, aspirator blower, disc with cell type metering plate, individual hopper, furrow openers, PTO driven shaft, ground drive wheel etc. It is suitable to plant seeds of mustard ,sorghum ,soybean cotton, pigeon pea, maize, groundnut, okra etc


Length X  Width X Height (mm)       :       1450  X 2450 X 1250

Weight (kg)                                          :              200

Draft (N)                                              :              2000

Working width (mm)                             :              2000-3000

Working depth (mm)                            :              100

Operating speed (km/h)                        :              3.0-5.0

Field capacity (ha/h)                             :              0.5-1.0

Field efficiency (%)                               :              60-65                                                                                                                                                                                                                    TOP

Labour requirement (man-h/ha)         :              1-2

Fuel consumption (l/h)               :              4.5

Power Requirement(hp/kW)              :               35/26.25


It is used to plant individual seeds at the predetermined seed/row spacing

Cost(Rs)   :    70,000-80,000




It is a single wheel driven and fitted with diesel engine. The machine is riding type and it transplants seedlings from mat type nursery in eight rows in a single pass. The drive wheel receives power from the engine through V-belt, cone clutch and gearbox. A propeller shaft from the gear box provides power to the transplanting mechanism mounted over the float. The tray containing mat type nursery for rows is moved sideways by a scroll shaft mechanism, which converts rotary motion received from the engine through belt-pulley, gear and universal joint shaft into linear motion of a rod connected to the seedling tray having provision to reverse the direction of movement of tray after it reaches the extreme position at one end. Fixed fork with knock out lever type planting fingers (cranking type) are moved by a four bar linkage to give the designed locus to the tip of the planting finger.  It is used to transplant paddy in the puddled field. Self-propelled mat type paddy transplanters are also available.


No's of rows                                                   :      6-8

Length (mm)                                                  :      2410

Width (mm)                                                   :      2130

Height (mm)                                                  :      1300

Row spacing(mm)                                         :       238

Distance between hills (mm)                        :       140 &170

Weight (kg)                                                   :       320                                                                                                                                                                                                        TOP

Working capacity (ha/h)                               :       0.57

Prime mover (hp/kW)                                   :       4.4/3.3, Air cooled, diesel engine


It is used for transplanting of mat type paddy seedlings. It saves labour and time but requires attention at the time of raising paddy nursery. It is available in riding type and self-propelled version.

 Cost(Rs) : 1,75,000-10,00,000








The machine consists of seedling tray, seat for the operator, furrow opener, compaction wheels, finger guide tunnel, picker wheel type metering mechanism. Picking forks has spring mounted rubber flappers, which open before passing through the tunnel and close during its passage. These flappers open again at the bottom end of the tunnel to release the seedlings in a furrow. The inclined wheels compact the soil around the seedlings. Two persons one for each row sitting on the machine is required to place the seedlings in the flappers when these open at the top position. The root side of the seedlings is kept towards the operator.


Length (mm)                                        :            1850

Width (mm)                                         :            1520

Height (mm)                                       ;            1160

Number of rows                                  :            2

Metering mechanism                            :            Picker wheel type

Number of picking fingers                    :            10       

Type of pickers                                   :            Rubber flappers

Row spacing (mm)                               :            600

Watering arrangement                         :            Two nozzles

Diameter of ground wheel (mm)       :    520

Machine weight(kg)                             :            225

Power source (hp/kW)            :            35/26.25, tractor


Vegetable transplanters are used for transplanting seedlings of vegetables such as, brinjal, cauliflower, chillies, tomatoes etc.

Cost (Rs)  : 35,000-40,000                                                                                                                                                                                                                                                  TOP